YÜKSEK Güvenlik Açığı
In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
CVE-2026-74655
CVSS 8.8/10 · YÜKSEK · 22.08.2026
Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 AÇIK NEDİR?
Açıklama: In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, un…
⚡ SALDIRI ZİNCİRİ
Yerel/fiziksel erişim | düşük yetkili hesap | kullanıcı etkileşimi YOK | düşük karmaşıklık.
⚠️ Scope değişiyor — etki diğer sistemlere sıçrayabilir.
🌍 GERÇEK DÜNYA ETKİSİ
Tüm gizli veriler okunabilir/çalınabilir; sistem verileri değiştirilebilir/silinebilir; hizmet tamamen devre dışı bırakılabilir; diğer sistemlere pivot mümkün.
🛡️ ÇÖZÜM VE MİTİGASYON
→ Üretici tarafından yayınlanan yamayı uygula.
→ WAF kuralı ekle, anormal trafik için IDS alert oluştur.
⚠️ ACİLİYET
⚠️ Planlı bakım (2 hafta) — Yüksek seviye.
────────────────────────────────────────
[Kural Tabanlı Analiz] [💡 config.json dosyasına ai_key (Claude: sk-ant-... veya Groq: gsk_...) ekleyerek gerçek AI analizi kullanabilirsiniz]
[⚠️ AI key mevcut ancak istek başarısız — kural tabanlı analiz kullanıldı]