CVE Professor — Güvenlik Açığı Takip & Analiz
›
CVE-2026-19184

CWE-787

YÜKSEK CVSS 8.4 ⚡ EPSS 0.1% NVD

The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as "large enough" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds. adc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion results past the end of that buffer, at an address and for a length of the caller's choosing. The overrun is bounded by the requested sequence: with sequence->options->extra_samplings set, the sampling loop walks the buffer pointer forward across every sampling, so the total overrun can reach the full size of the supplied buffer (kilobytes for a large extra_samplings). The written words are 16-bit ADC conversion results, so the content is only partially attacker-influenced (via the selected analog input, gain and resolution), but the destination and length are fully controlled — sufficient for kernel memory corruption, a crash, or a userspace-to-kernel privilege escalation. Builds without CONFIG_USERSPACE, or on SoCs other than NXP RW61x with the GAU ADC node enabled, are not exposed to the privilege boundary; there the same defect only causes a silent overflow when the application itself passes an undersized buffer. The fix replaces the ad-hoc check with the shared adc_sequence_validate_buffer() helper (validating against num_channels * sizeof(uint16_t)), stores buffer_size / sizeof(uint16_t) in results_length, and corrects the loop bound to a post-decrement so exactly the available number of slots may be written.

Yayınlanma 05.10.2026
ISO Tarih 2026-10-05
CVSS Sürüm v3.1
Kaynak NVD
CVSS v3.1 Metrikleri
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H
Attack Vector Local AV:L
Attack Complexity Low AC:L
Privileges Req. Low PR:L
User Interaction None UI:N
Scope Changed S:C
Confidentiality None C:N
Integrity High I:H
Availability High A:H
EPSS — Exploit Olasılık Skoru
0.1%
30 günlük olasılık
Tüm CVElerin 1. yüzdeliğinde — Bu açığın istismar edilme ihtimali çoğu CVEden yüksek.
AI Güvenlik Analizi

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
CVE-2026-19184
CVSS 8.4/10 · YÜKSEK · 05.10.2026
CWE: CWE-787
Vector: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

🎯 AÇIK NEDİR?
Buffer Overflow / Memory Corruption
Açıklama: The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeo…

⚡ SALDIRI ZİNCİRİ
Saldırı adımları:
1. Fuzzing ile çöküş noktası tespit edilir: Boofuzz, AFL++ ile.
2. GDB/PEDA ile offset hesaplanır: pattern create 500 → crash → pattern offset EIP_VALUE
3. Stack/Heap layout analizi.
4. ROP gadget ile NX bypass.
5. Metasploit varsa: use exploit/... ; run

🔧 Araçlar: GDB+PEDA/pwndbg, ROPgadget, pwntools, Metasploit, AFL++
🗺️ MITRE ATT&CK: T1203 (Exploitation for Client Execution), T1068

🌍 GERÇEK DÜNYA ETKİSİ
Sistem verileri değiştirilebilir/silinebilir; hizmet tamamen devre dışı bırakılabilir; diğer sistemlere pivot mümkün.

🛡️ ÇÖZÜM VE MİTİGASYON
→ Üretici tarafından yayınlanan yamayı uygula.
→ ASLR/NX/Stack Canary aktif olduğunu kontrol et.
→ WAF kuralı ekle, anormal trafik için IDS alert oluştur.

⚠️ ACİLİYET
⚠️ Planlı bakım (2 hafta) — Yüksek seviye.

────────────────────────────────────────
[Kural Tabanlı Analiz] [💡 config.json dosyasına ai_key (Claude: sk-ant-... veya Groq: gsk_...) ekleyerek gerçek AI analizi kullanabilirsiniz]

[⚠️ AI key mevcut ancak istek başarısız — kural tabanlı analiz kullanıldı]

Hedef Keşif Sorguları
CVSS Skoru
8.4 / 10 · CVSS YÜKSEK
Zayıflık Türleri (CWE)
CWE-787
Referanslar (2)
İlgili CVE'ler
10.0
CVE-2026-129351
A security vulnerability has been detected in TRENDnet TEW-657BRM 1.00.1. This vulnerability affects the funct
9.9
CVE-2026-85746
MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11
9.9
CVE-2026-100740
A vulnerability was detected in D-Link DIR-895L A1_102b07. Impacted is the function tunnel_set_params of the f
9.9
CVE-2026-86510
A vulnerability has been found in D-Link DIR-822A A_101. Affected is the function tunnel_set_params of the com
9.8
CVE-2026-79614
An out-of-bounds write vulnerability in “libclinkc.so” in Zyxel DX3301-T0/EX3301-T0 firmware versions thro